You can make custom-colored, standard, medium, or light-weight, Olde Castle Stone and veneer with our molds. Each mold was made from actual hand-cut stones that were made for the castle in the photo. These molds come in twenty (20) individual sizes that range from 2"x6" up to 18"x18", as well as in a 10 Square Foot Set and a Cap Stone Set. The 10 Square Foot Set consists of 24 different molds in a 10 square foot pattern. The pattern is available for free with the purchase of the set. And the Cap Stone Set consists of six molds, sized to fit on top of a concrete block wall that has a Castle Stone facing. Photos of each are below. The molds are all a nominal 1-1/2" deep, but can be poured thinner should you want to make a stone veneer, or a 1/2" thick tile for a floor, counter top, wall tile, etc. See the photo below of the stove back splash. These are 4"x4"x1/2" Castle Stone "tiles".
The photos below illustrate some installations using various sizes of Castle Stone. This stone can be used for floors, patios, driveways, stepping stones, pavers, counter tops, etc., as well as in a vertical application like a wall. As the stone you make ages, it looks more and more like an authentic Scottish or English Castle Stone. (Below)
All of the Castle Stone sizes are illustrated, and available for purchase in our Store.